GMD – MECHANICAL TEE THREADED BSPT – TDS_EN.pdf
Description
Threaded mechanical tees may be used for any tee connection where a threaded outlet is headed. They may be converted into a cross when necessary
Sizes
Available sizes are DN50x32-DN150x65.
Operating pressure
300 PSI/2068 kPa/20,7 barg..
Material Specification
Body: Cast iron ASTM A536 65-45-12
Finish: Red paint RAL 3000 or galvanized (Dacromet)
Gasket: EPDM gaskets dispose of the international certifications and have undergone the aging test at 110C/230°F during a period of 45 days/1080 hours and the frozen test at -40°C/-40°F during a period of 4 days/96 hours.
Bolt & Nut: see technical datasheet bolts and nuts
Dimensions:
| DN | Dy (in mm) | L (mm) | H (mm) | W (mm) | Ø (mm) | The hole saw (mm) | Bolt | Torque (Nm) | Weight (kg) |
| 50×32 | 60.3×42.3 | 120 | 55.0 | 83 | 85 | 48+1 | M10x50 | 75-80 | 0.76 |
| 50×40 | 60.3×48.3 | 120 | 63.0 | 83 | 85 | 46+1 | M10x50 | 75-80 | 0.83 |
| 65×32 | 76.1×42.4 | 139 | 60.0 | 83 | 100 | 46+1 | M10X60 | 75-80 | 0.87 |
| 65×40 | 76.1×48.3 | 139 | 60.0 | 90 | 100 | 53+1 | M10x60 | 75-80 | 0.95 |
| 80×25 | 88.9×33.7 | 155 | 66.5 | 76 | 113 | 38+1 | M10x60 | 75-80 | 0.84 |
| 80×32 | 88.9×42.4 | 155 | 66.5 | 83 | 113 | 46+1 | M10x60 | 75-80 | 0.92 |
| 80×40 | 88.9×48.3 | 155 | 66.5 | 100 | 113 | 53+1 | M10x60 | 75-80 | 1.01 |
| 80×50 | 88.9×60.3 | 155 | 66.5 | 100 | 113 | 64+1 | M10x60 | 75-80 | 1.11 |
| 100×25 | 114.3×33.7 | 181 | 83.0 | 76 | 140 | 38+1 | M12x70 | 125-140 | 1.17 |
| 100×32 | 114.3×42.4 | 181 | 83.0 | 83 | 140 | 46+1 | M12x70 | 125-140 | 1.22 |
| 100×40 | 114.3×48.3 | 181 | 83.0 | 90 | 140 | 53+1 | M12x70 | 125-140 | 1.27 |
| 100×50 | 114.3×60.3 | 181 | 83.0 | 100 | 140 | 64+1 | M12x70 | 125-140 | 1.39 |
| 150×32 | 168.3×42.4 | 239 | 106.0 | 83 | 196 | 46+1 | M14x85 | 135-145 | 2.01 |
| 150×40 | 168.3×48.3 | 239 | 106.0 | 90 | 196 | 53+1 | M14x85 | 135-145 | 1.93 |
| 150×50 | 168.3x 60.3 | 239 | 106.0 | 100 | 196 | 64+1 | M14x85 | 135-145 | 2.2 |